PDS
MSDS
RAPIDSPolypropylene Homopolymer Resin for BOPP Film
- Very stable tenter-process
- High clarity
- High gloss
- Good mechanical propertiess
- Plain BOPP film for food packaging
- Textiles packaging and flower wrappings
| PP Resin Properties (a) | Moplen HP420J | ASTM METHOD(b) |
|---|---|---|
| Melt flow rate (230°C / 2.16 kg), dg/min | 3 | D1238 |
| Density, g/cm3 | 0.90 | D792B |
| Tensile strength at yield, MPa | 32 | D638 |
| Elongation at yield, % | 11 | D638 |
| Flexural modulus, MPa | 1350 | D790A |
| Notched izod impact strength at 230 °C, J/m | 40 | D256A |
| Deflection temperature, at 455 kPa, °C | 96 | D648 |
(b) ASTM test methods are the latest under Society’ s current procedures. All molded specimens are prepared by injection.
FDA Statement :
Moplen HP420J meets USF&DA requirements in the Code of Federal Regulations in
21 CFR 177.1520 for all food contact. All ingredients in Moplen HP420J meets the chemical registration requirements of TSCA (U.S.) and DSL (Canada).
Note: Due to the fact that different regulations in each country set different details of compliance, users of Moplen HP420J are recommended to undertake their own investigation of the requirements and comply with each regulation set forth, for instance, in applicable local F&DA requirements. Ultimately the users must make their own determination that their use of Moplen HP420J is safe, lawful and technically suitable in their intended applications.
Issued 10-Jul-07
The purpose of this document is only for technical support of the use of the product.
Before using a HMC Polymers Product, customers and other users should make their own independent determination that the product is suitable for the intended use. They should also ensure that they can use the HMC Polymers product safely and legally. This document does not constitute warranty, express or implied, including a warranty of merchantability or fitness for a particular purpose. No one is authorised to make such warranties or assume any liability on behalf of HMC Polymers except in writing signed by an authorised HMC Polymers employee.
Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at HMC Polymers' opinion, and in no event shall HMC Polymers be liable for special, consequential, punitive, or exemplary damages.
